Is your Hathaspace Air Purifier not working as it was before? Is your air purifier showing different signs?
Do not worry, there might be an issue with the air purifier. It can be fixed.
In this article, I covered most of the issues that you see in the Hathaspace air purifier. I also covered the ways to resolve these issues in this Hathaspace air purifier troubleshooting guide.
Without any further ado, let’s deep dive!
Hathaspace Air Purifier Troubleshooting [Common Issues]:
Generally, the Hathaspace air purifier shows signs of common issues, which can be resolved by yourself by following this guide.
If it is not resolved by yourself, then you need to contact customer support for their assistance.
Hathaspace Air Purifier is not turning ON:
This is the common issue, that most of the Hathaspace air purifier users face. It can be resolved by ensuring a stable power supply to the air purifier.
Following are the well-known checkpoints!
Check Power Supply to an Outlet:
First, you need to make sure that there is a power supply to the outlet.
If it is not, then ensure to turn it on.
Plug the Power cord:
Next, you need to plug the power cord of the air purifier into the socket.
Now switch it ON, this should start the Hathaspace air purifier.
If it is working, Fine!
If not follow the next checkpoint.
Check the Condition of the Power Cord:
If you have been using this air purifier for a long time, chances are the cord may wear out with time.
If the condition of the Power cord is not good, you need to replace the power cord. This would resolve the issue.
If you find that the Power cord is in good condition, then you need to follow the next checkpoint.
Check the Front Panel of the air purifier:
Sensors in the air purifier, do not allow the air purifier to operate until the front panel is placed correctly.
Check the front panel and place it correctly in the air purifier. This should resolve the issue and you can turn on the air purifier.
I’ve gone through the basic checkpoints that would stop the air purifier from turning ON.
If these checkpoints do not resolve the issue then you need to contact the Hathaspace customer support team for further assistance on this issue.
Hathaspace Air Purifier Sensor Not Working:
Sensors in the Hathaspace air purifier are very sensitive and precise. The sensors show real-time data on the air quality in the room.
If dust clogs on the sensor, it stops working and shows an error of code 500.
Your air purifier would stuck at 500. To resolve this issue, you need to clean the sensor.
Don’t be panic! It is easy if you follow the below steps.
Alright!
- Open the sensor door with the help of a screwdriver.
- Remove the sensor from the slot.
- Disconnect the sensor by removing the cord.
- Clean the sensor with the help of canned air.
- Once it is cleaned, reconnect the sensor cord.
- Close the sensor door.
This should resolve the issue and the sensor starts working as usual.
Hathaspace Air Purifier is Very Noisy:
If your Hathaspace air purifier is making a peculiar noise. This could be due to any structural defect in the air purifier or there can be any loose fitting in the air purifier.
You can confirm only by checking the internal parts of the air purifier.
We cannot open and check the internal parts of the air purifier. You need to take the help of a technical person.
So, I recommend contacting Hathaspaca customer service centers to resolve this issue.
Touch Buttons in the Control Panel are not Working:
Sometimes, you may observe that touch buttons in the control panel are not responding and you are unable to change the settings in your air purifier.
One of the reasons for this issue can be the enabled child lock feature.
To resolve this issue, first, you need to confirm that the child lock feature is enabled in your air purifier.
If so, then you need to unlock this feature to be able to use the control panel.
To unlock the child lock feature, you need to press and hold the both sleep and light buttons for 3 seconds.
This unlocks the child lock feature and you can use buttons in the control panel.
Different Smell around the Air Inlet:
If you see that peculiar smell around the inlet this could be because of two reasons.
One reason could be if the room is polluted with strong odors that cannot escape the room because of less ventilation.
You need to vent the room to allow odors to escape the room. This would fix the issue of a strong smell around the air inlet.
Another reason could be filter in the air purifier is heavily loaded with pesky dust particles that smell like a strong odor.
To fix this you need to replace the filter from the air purifier.
Hathaspace Air Purifier Troubleshooting [Other Issues]
Hathaspace air purifier shows other issues while using it for some time. You can fix this issue if you know the right steps.
Hathaspace Air Purifier Keeps Beeping:
It is a reminder for filter replacement in the Hathaspace air purifier. This unit comes with a built-in timer that goes off after 3000 Hours of operation.
The Auto and Timer button keeps flashing along with the beeping sound.
To reset the timer and to stop the beeping noise, you need to press and hold the Auto and timer buttons for 3 seconds.
It is recommended to replace the filter and then reset the timer.
How Do I Contact Hathaspace Customer Support?
Hathaspace Customer support service can be availed at any time.
There are many modes available to reach customer support service help.
You can approach them using this email address ( team@hathaspace.com) and also you can contact them over a call at this number 800-446-0535.
Conclusion
Most of us will agree with this statement that, If you see any issue in your devices, especially air purifiers, there will be a solution available to fix that issue.
Similarly, if your Hathaspace air purifier is having an issue while cleaning the air. You can find a solution for this issue and easily fix that issue.
To resolve the issue, you can go through the product manual or Hathaspace Air Purifier Troubleshooting guide, which we covered in this article.
Hope this article, helped you in troubleshooting your Hathaspace Air Purifier and using it effectively as you used to do it before.
Frequently Asked Questions (FAQs)
How Do I Set My Air Purifier to Auto-Mode?
In the Hathaspace HSP003 Air Purifier, you must press and hold the fan speed button for 3 seconds to enable the auto mode feature.
What Does the Power Button Blinking Light Mean?
In the Hathaspace HSP003 Air Purifier, you observe a power button blinking light indicating that your filter needs replacement. You need to replace the filter as early as possible.
How to Reset Filter in My Hathaspace Air Purifier?
In the Hathaspace HSP003 Air Purifier, Filter reset is done by Pressing and Holding the Timer and sleep buttons for 3 seconds.
In the Hathaspace HSP002 Air Purifier, the Filter is reset by pressing and holding the Auto and Timer buttons for 3 seconds. You can confirm it by a beep sound.
