Are you worried about the Mooka air purifier flashing red light?
You tried to fix it by turning off the Mooka air purifier but your efforts were in vain.
Do not Worry! You have come to the right place.
In this article, We have covered you and we will help you to understand and also guide you to troubleshoot the red light flashing issue.
Let’s get started! Before that the Short Answer to this is
Mooka air purifier shows a flashing red light only when there is a need for filter replacement. Once you are done with replacing the filter, you need to reset the filter to stop the flashing red light.
Mooka Air Purifier Flashing Red Light: Why Is It?
You need to remember that when the Mooka air purifier’s red light flashes, this is an indication that the filter is fully loaded with dust particles and airborne particles.
Mooka air purifier units are designed to flash a red light when there is a need for a filter cleaning or replacement.
This feature helps not only to maintain the air purifier in good condition but also to maintain the quality of the indoor air all the time.
When you observe your Mooka air purifier light blinking (red light), you need to check the filter condition if it requires cleaning, clean the filter, and reuse the filter in the air purifier.
You need to Clean Mooka air purifier filter in an open area of your house and cover your face to avoid inhaling the dust particles.
Or else,
If you’ve been using this filter for more than six months, then you need to replace the filter with a new one.
You need to make sure that the new filter you purchase must be manufacturer-approved for the good performance of your air purifier.
After cleaning or replacing the filter, you will find that the red light still flashes.
Next, you need to reset filter on Mooka air purifier to ensure that the red light is off.
How Long Does a Mooka Air Purifier Filter Last?
Generally, the Mooka air purifier filter needs to be changed every six months. But it depends on the quality of the indoor air.
If you live in an urban, busy area or in a polluted area you need to replace the filter sooner.
Mooka air purifier also comes with a Pre-filter. It requires only cleaning. Do not wash with water.
If you have used water for cleaning, you must dry the filter before using it in the air purifier.
How to Change the Filter in the Mooka Air Purifier?
Sometimes, it’s not required to change the filter, if the filter seems to be not so dirty. You just need to clean the Mooka air purifier filter that works well.
If the filter seems to be dirty then it’s better to replace the filter than clean it.
Mooka air purifier True HEPA filter needs to be changed every six months. Before starting to change the filter you need to get the new filter that is approved by the manufacturer.
If this is the case and you have started using the filter recently, you can check once by cleaning the filter.
To change the filter in your Mooka air purifier, you can follow the below steps:
- Switch off the air purifier and unplug the power cord.
- Remove the filter panel from the air purifier.
- Remove the old filter from the air purifier.
- Remove the wrapping from the new filter.
- Install the new filter in the air purifier.
- Close the filter panel and plug in the power cord.
- Now switch on the air purifier and reset the filter.
How Do I Reset My Mooka Air Purifier Filter Light?
Generally, the Filter needs to reset whenever a new filter is installed in the air purifier. Another reason could be if there is a red light flashing in the air purifier.
To reset the filter, you need to press and hold the power button for about 7 seconds.
We have covered this in detail, How to reset the filter on Mooka Air Purifier. Check out this guide.
We have covered by considering two models in this article and described how to reset these models.
Why is the Fan Light Blinking on My Mooka Air Purifier?
Mooka Air Purifier is available in different models in the market. In some models, you will find the filter replacement button and this button flashes when filter replacement is required.
But in some models, you will not find the filter replacement button, the fan light in the control panel flashes whenever there is a need for filter replacement.
You need not worry about the fan light flashing, you just need to clean the filter or replace the filter.
After that, you need to reset the filter to make sure the flashing light goes away.
What Does Blue Light Mean on the Mooka Air Purifier?
In Some Mooka air purifier models, you will find Blue Light flashing in your air purifier. It indicates that the air quality is good.
But it is not true.
This can be because the air intake is blocked. Check the air inlets for any blockage and clean them if any.
Maybe the room is too big and the size of your air purifier is not sufficient to cover the entire room.
Use this air purifier for the smaller room.
If you face any issues with your air purifier, you can find Mooka air purifier troubleshooting tips and techniques to resolve it by yourself.
Conclusion
When we start using the air purifier sometime or later you will find the red light flashing in the control panel.
It is an indication to replace the filter in your air purifier.
In this article, I explained in detail when to change the filter, How to change the filter, and How to reset filter in your Mooka air purifier.
Hope this article helped you to fix the Mooka air purifier flashing red light issue.
